Safewire HTD-146KP-86 Service outlet box TUV CE certificated access floor boxes concrete floor boxes EV charging station

Quick Details:

Application:

1.Feature of Safewire floorbox:

1. Customzation design & production: ODM & OEM as per samples or drawing by each of us.

       2.Supply with SKD parts or finished products, save cost: save cost, save money for you!

        3.Flush-mounting & Recess-mounting in Access floor & Recess floor

     2.Advantage of Safewire floorbox :

1. Patent Retractable cable entry design:

         2.More affordable MOQ less than 100 units:

       3.More internation socket , multimedia and Data accessories :

3.Specification of Safewire floorbox :

A)Product dimension:

B)Available installation modules/socket/accessories:

Installation instructions:

1. Cut out 132*132(mm)，Powering the slurry.
2. Remove the pre-installed temporary lid,wiring and installing modules,Per-installed cable pipe                   as per your request .
3. Install cover lid and tighten with screws.
4. Conceal the cut edge of carpet of flooring  

Attentions:

1.When installing and wiring,Product should avoid direct contact with corrosive liquid, gas (strong acid, strong alkali, paint).

2.This product is suitable for dry surface treatment, avoid water flush and immersion, and ensure its insulation.This product is not suitable for use in wet areas.

3.All dimensions quotes are nominal only.Drawing images and specification are only for illustrative purposes and dimensions are subject to final confirmation by us.

Safety Warning：

1.This is a class I product and must be earthed

2.This product must be installed/wired by a qualified electrician

3.For indoor use only.

1.Cable Exit is customization

2.Cavity depth is customization

3.Knock-out diameter is customization

4.Configuration as twins switch socket as 86*86.

5.Depth of bottom box is customization

The raised floor to socket requirements:

1.Environmental protection.

2.Fire prevention/Corrosion resistant/high strength.

3.Good interchangeability with raised floors.Easy to installation.

4.The laying height of the floor is 35mm ~150mm

 Concrete floor requirements for floor socket：

1.No pollution to the environment, no harm to the human body, no toxicity.

2.Easy to install and easy to use, not easy to damage

The enclosures of all maintenance boxes shall be fabricated from halogen-free, non-toxic, and environmentally sustainable materials. Their corrosion resistance shall be capable of withstanding exposure to solutions with an acid concentration of 10% or an alkali concentration of 10% and above. The material shall exhibit a temperature stability range of no less than -40°C to +90°C, and its flame resistance temperature in the hot filament test shall not be lower than +960°C. It shall possess properties such as full insulation, dust resistance, water resistance, corrosion resistance, impact resistance, UV resistance, heat resistance, flame retardancy, shock resistance, and high mechanical strength.

Sectional maintenance boxes shall be made of polycarbonate material, which is characterized by corrosion resistance, halogen-free composition, flame retardancy, and self-extinguishing capability. The impact resistance rating shall meet IK09, and the box body shall be of an integrated design. Sealing bolts shall be provided for cable entry into the maintenance boxes, and sufficient space for incoming cables shall be considered. Sockets shall have high impact resistance and corrosion resistance; industrial connectors shall have a protection rating of IP67. Sockets and circuit breakers shall be mounted on the surface of the box body for ease of operation, with specific configurations detailed in the system diagram of the sectional maintenance boxes. The overall protection rating of the maintenance boxes shall reach IP66.