IEC60884 Standard Raised Floor Socket / Cavity Floor Box RCD Modules

Quick Details:

Application:

1.Feature of Safewire floorbox:

1. More capacity:8,12,16,24 way 45*45mm modules ; or 3 compartments bridges:
2. More optional switch & socket: International 45*45mm modules,86 type,120 type etc.
3. More optional installation:Horizontal,Side-mounting, Side-mounting & Horizontal;
4. More Optional surface with carpet/Marble .

         5. More optional box for raised floor or concrete floor: Galvanized box, Stainless steel box and plastic box etc.

2.Advantage of Safewire floorbox : 

3.Specification of Safewire floorbox :

TUV CE certificated+access floor boxes/cavity floor boxes/underfloor bottom boxes/floor socket outlet/carpet box/service outlet box/floor box/concrete floor boxes/cable managment 

A)Product dimension:

B)Available installation modules/socket/accessories:

C)FACTA class/EN124 class load of coverplate:

D)Safewire floorbox Application in different floor system:

E)Safewire optional of economical package  :

Attentions:

1.Dispose of trash in bottom box and prevent dirt and debris from entering inside.

2.The sealing ring is closely attached to the smooth surface to prevent water leakage.

3.When installing, pay attention to the opening direction,the length of the conductor to the bottom box shall not exceed 10cm,Set aside at least 200mm of cable.

4.When installing and wiring,Product should avoid direct contact with corrosive liquid, gas (strong acid, strong alkali, paint).

5.Please close cover when not used.

Safety Warning：

1.This is a class I product and must be earthed

2.This product must be installed/wired by a qualified electrician

3.For indoor use only.

4.For concrete floor/access floor.base on different bottom box.