| Serial No. | Parameter | Description |
| 1 | Panel Material |
Aluminum alloy |
| 2 | Surface finish |
Electroplated/Painted/Power sprayed |
| 3 | Color |
Silver/black/white: Black color: RAL9005;White color: RAL9016;Silver color: RAL9006; |
| 4 | Panel Dimension(mm) |
240×120 |
| 5 | Cutout(mm) |
231×112 |
| 6 | Height of product(mm) |
70 |
| 7 | Bottom box size(mm) |
229*110*70 |
| 8 | Bottom box material |
Plastic |
| 9 | Capacity of modules /Interface size |
3 BS socket |
| 10 | Configuration |
Power outlet+Data outlet or USB charging : Customized as required |
| 11 | Cable length |
1.5m, 2m,2m or required length |
Application:
1.Feature of Safewire pop up desksocket :
1. 6 ways ,4 ways,45*45mm power Socket & Data
2.Black/White/Silver/Gold/Graphite/Nicket chrane etc.
3.2 bridge empty enclosure or complete socket with plug cable.
2.Advantage of Safewire pop up desksocket :
Table socket / power socket/service outlet office socket/furniture socket table power outlet/pop up socket/hotel socket/table recess console/power dock table mounts socket
1.IP44,Aluminum alloy plate + UL94 PC fire retardant box , More higher insulation,more safety.
2.45mm snap-in socket+ 2 bridge support + screw fixing box,Easy Installation& replacement save labor cost.
3.45 degree/180 degree plug with socket + IP44 pop up 45mm socket with shutter,more best plug.
3.Specification of Safewire pop up desksocket:
A)Product dimension:
B)45*45mm modules&socket:
Installation Process
- Cut out as specification sheet.
- put the bottom box into cut-out hole,punch the self-tapping screw and fix the bottom box.
- Remove plastic frame fixing socket modules.Assembly the socket or data Jack into the plastic frame and press frame ensure them combine tightly.
- Keep socket modules connected by inner wire (it should be copper core 1.5mm29~20 wire and length should be suitable).Then earthing and ensure inner wire tightly with modules.For fast connector terminal block,Just insert wire into block.
- Phone line ,TV receiving line sound box wire（it should thin wire）Just the wire length and tighten stop screw comathen.
- Put the panel on the bottom box and it with the hole.
Attentions:
1.Prevent from corrosive liquid, gas (strong acid, strong alkali, paint)and humidity.
2. All dimension quoted are nominal only. Drawings , images and text are for illustrative perposes only and product details and dimension are subject to change without notice.
Safety Warning:
1)This is a class I product and must be earthed
2)This product must be installed/wired by a qualified electrician
3)before installation/maintnance ,ensure the mains supply is switched off and the circuit fuses are removed or circuit breakers switch off
4)For indoor use only
1.The panel is by aluminum alloy of integrate die casting structure,more reliable surface finish protect from scratch.
2.Easy Installation：Only need screw the bottom box through hole of panel. Fast wiring HTJ-002 terminal block tight by 3 screw,0.5~6mm2soft/hard wire.
3.Replace modules no need to change complete desktop socket,save labor lost.
4.Fire retardant PC plastic bottom box.
Available for 45*45mm type international sockets or modules types:
The enclosures of all maintenance boxes shall be fabricated from halogen-free, non-toxic, and environmentally sustainable materials. Their corrosion resistance shall be capable of withstanding exposure to solutions with an acid concentration of 10% or an alkali concentration of 10% and above. The material shall exhibit a temperature stability range of no less than -40°C to +90°C, and its flame resistance temperature in the hot filament test shall not be lower than +960°C. It shall possess properties such as full insulation, dust resistance, water resistance, corrosion resistance, impact resistance, UV resistance, heat resistance, flame retardancy, shock resistance, and high mechanical strength.
Sectional maintenance boxes shall be made of polycarbonate material, which is characterized by corrosion resistance, halogen-free composition, flame retardancy, and self-extinguishing capability. The impact resistance rating shall meet IK09, and the box body shall be of an integrated design. Sealing bolts shall be provided for cable entry into the maintenance boxes, and sufficient space for incoming cables shall be considered. Sockets shall have high impact resistance and corrosion resistance; industrial connectors shall have a protection rating of IP67. Sockets and circuit breakers shall be mounted on the surface of the box body for ease of operation, with specific configurations detailed in the system diagram of the sectional maintenance boxes. The overall protection rating of the maintenance boxes shall reach IP66.