25*38mm Unshielded Cat5e CAT6 Krone IDC RJ45 Module

Product Description

RoHS Certificate of Compliance：Conforms with the Directive 2002/95/EC (ROHS)

Product description

Safewire Feed-Thru RJ45 keystone jack modules is including CAT5e,CAT6 Keystone of 8-position 8-conductor (8P8C) & shutter and designed for computer networking. 568A and 568B color wiring diagram is integrated on the lid for easy installation. The modular plugs are manufactured from high-impact clear poly-carbonate to withstand everyday wear and tear.

*Applicable for: Compatible with field-configurable panels and 86*86mm/86*146mm work area faceplate ; Slim profile design for the high density applications.

* CAT6 rated connector provide excellent performance for data networks 100MHZ/120Mbps speed and bandwidth.

* PCB technology provides maximum performance and superior signal quality.

* Gold plated contacts and easy snap-in retaining clip ensure a secure and corrosion free connection.

* Using high quality poly-arbonate flame retardant materials as UL94V-0.

* Includes an integrated TIA-568A/B color wiring diagram.

* Backwards compatible to all lower rated category components.

* The modules are particular used for where space is limited such as in floor box.

* Applicable wire gauge: 22 to 26AWG.

* Rear IDC (Insulation Displacement Connector) type contacts offer effortless of termination and improved wire retention:.

Technical Spec.:

1. Electrical:

1.1.Insulation Resistance: Min 500 MOhm @100 Vdc.

1.2.Dielectric Withstanding voltage/Compressive strength: 1,000 Vdc/ac peak contact-to-contact @ 60 Hz for 1 min.

1.3.Spring Wire Contact Resistance: Max. 20 mOhm.

1.4.IDC Contact Resistance: Max. 2.5 mOhm.

Mechanical:

2.1. Dimensions:D: 34.42mm/1.35”; W:23.03mm/0.91”; H:45mm/1.77”;

2.2. Wiring diagram: TIA/EIA568 OR ISO/IEC11801 standard;IDC wiring:180 degree IDC twisted Pairs;

2.3. Total Contact Force: Min 800 g for 8 wire leads.

2.4.  Retention: 50 N(11 lbf) for 60+_5 S;

2.5. Mating Cycle Life: Min 750 cycles;

Construction:

3.1. Housing: Fire retardant PC material: UL94V-0;

3.2. Jack Spring Wire:Phosphor Bronze alloy plated with 50 Uin of gold over 70 to 100 Uin of nickel;

3.3. IDC: IDC110 type, phosphor Bronze alloy with 100 Uin 100% tin alloy;22-26AWG conductor;

Installation Instructions:

1. Insert Prepared Jack:Strip off cable jacket to expose approximately 3/4″ /1.90mm of wires . Then wire jack to preferred wiring scheme.
2. Punch& Cut: Insert jack into your termination tool and press firmly down to terminate and cut excess wire.
3. Installation: Slide terminated jack out of the Termination Tool. And install supplied IDC cap onto jack.
4. Snap into: Ready to snap into the faceplate or panel.

The enclosures of all maintenance boxes shall be fabricated from halogen-free, non-toxic, and environmentally sustainable materials. Their corrosion resistance shall be capable of withstanding exposure to solutions with an acid concentration of 10% or an alkali concentration of 10% and above. The material shall exhibit a temperature stability range of no less than -40°C to +90°C, and its flame resistance temperature in the hot filament test shall not be lower than +960°C. It shall possess properties such as full insulation, dust resistance, water resistance, corrosion resistance, impact resistance, UV resistance, heat resistance, flame retardancy, shock resistance, and high mechanical strength.

Sectional maintenance boxes shall be made of polycarbonate material, which is characterized by corrosion resistance, halogen-free composition, flame retardancy, and self-extinguishing capability. The impact resistance rating shall meet IK09, and the box body shall be of an integrated design. Sealing bolts shall be provided for cable entry into the maintenance boxes, and sufficient space for incoming cables shall be considered. Sockets shall have high impact resistance and corrosion resistance; industrial connectors shall have a protection rating of IP67. Sockets and circuit breakers shall be mounted on the surface of the box body for ease of operation, with specific configurations detailed in the system diagram of the sectional maintenance boxes. The overall protection rating of the maintenance boxes shall reach IP66.