Cable Matters 25-Pack CAT6 RJ45 Keystone Jack in White and Keystone Punch-Down Stand

Short Description:


  • Port: Wenjiang
  • Technical Parameters


    Product Tags

    Product Description

    Item No. M-NE-182A
    Category CAT5E,CAT6
    TIA/EIA 568A/B coded
    Terminal Dual IDC
    Type Unshielded
    Size 25*38mm
    Brand Safewire
    Material Panel: ABSInside part: Copper;Touch point : Silver alloy touch point
    Color White/Black optional
    Mechanical Life 50,000 Times


    RoHS Certificate of Compliance:Conforms with the Directive 2002/95/EC (ROHS)




  • Previous:
  • Next:

  • Product description

    Safewire Feed-Thru RJ45 keystone jack modules is including CAT5e,CAT6 Keystone of 8-position 8-conductor (8P8C) & shutter and designed for computer networking. 568A and 568B color wiring diagram is integrated on the lid for easy installation. The modular plugs are manufactured from high-impact clear poly-carbonate to withstand everyday wear and tear.

    *Applicable for: Compatible with field-configurable panels and 86*86mm/86*146mm work area faceplate ; Slim profile design for the high density applications.

    * CAT6 rated connector provide excellent performance for data networks 100MHZ/120Mbps speed and bandwidth.

    * PCB technology provides maximum performance and superior signal quality.

    * Gold plated contacts and easy snap-in retaining clip ensure a secure and corrosion free connection.

    * Using high quality poly-arbonate flame retardant materials as UL94V-0.

    * Includes an integrated TIA-568A/B color wiring diagram.

    * Backwards compatible to all lower rated category components.

    * The modules are particular used for where space is limited such as in floor box.

    * Applicable wire gauge: 22 to 26AWG.

    * Rear IDC (Insulation Displacement Connector) type contacts offer effortless of termination and improved wire retention:.

    Technical Spec.:

    1. Electrical:

    1.1.Insulation Resistance: Min 500 MOhm @100 Vdc.

    1.2.Dielectric Withstanding voltage/Compressive strength: 1,000 Vdc/ac peak contact-to-contact @ 60 Hz for 1 min.

    1.3.Spring Wire Contact Resistance: Max. 20 mOhm.

    1.4.IDC Contact Resistance: Max. 2.5 mOhm.

    1. Mechanical:

    2.1. Dimensions:D: 34.42mm/1.35”; W:23.03mm/0.91”; H:45mm/1.77”;

    2.2. Wiring diagram: TIA/EIA568 OR ISO/IEC11801 standard;IDC wiring:180 degree IDC twisted Pairs;

    2.3. Total Contact Force: Min 800 g for 8 wire leads.

    2.4.  Retention: 50 N(11 lbf) for 60+_5 S;

    2.5. Mating Cycle Life: Min 750 cycles;


    1. Construction:

    3.1. Housing: Fire retardant PC material: UL94V-0;

    3.2. Jack Spring Wire:Phosphor Bronze alloy plated with 50 Uin of gold over 70 to 100 Uin of nickel;

    3.3. IDC: Dual IDC type, phosphor Bronze alloy with 100 Uin 100% tin alloy;22-26AWG conductor;


    Installation Instructions:

    1. Insert Prepared Jack:Strip off cable jacket to expose approximately 3/4″ /1.90mm of wires . Then wire jack to preferred wiring scheme.
    2. Punch& Cut: Insert jack into your termination tool and press firmly down to terminate and cut excess wire.
    3. Installation: Slide terminated jack out of the Termination Tool. And install supplied IDC cap onto jack.
    4. Snap into: Ready to snap into the faceplate or panel.
    WhatsApp Online Chat !