Short Description:
| Serial No. | Parameter | Description |
|
1 |
Provision for earthing |
With earthing contact |
|
2 |
Dimension |
146mm x 86mm |
|
3 |
Material | ABS |
|
4 |
Color |
White |
|
5 |
Standard of Socket |
EU or Germany Standard |
|
6 |
Rated Voltage |
110V-250V |
|
7 |
Rated Current |
16A |
|
8 |
Capacity of modules |
2 X 45*45mm socket |
|
9 |
Installation method |
Concealed installation |
description
Product characteristics
1.1-gang boxes for masonry
2.Square boxes for joining together
3.For wiring accessories using screws or claws
4.For wiring accessories using screws or claws
5.1-gang boxes can be used to make up multi-gang boxes by joining
6.Can be used horizontally or vertically
Safety Warning：
1.This is a class I product and must be earthed
2.This product must be installed/wired by a qualified electrician
3.For indoor use only.
The enclosures of all maintenance boxes shall be fabricated from halogen-free, non-toxic, and environmentally sustainable materials. Their corrosion resistance shall be capable of withstanding exposure to solutions with an acid concentration of 10% or an alkali concentration of 10% and above. The material shall exhibit a temperature stability range of no less than -40°C to +90°C, and its flame resistance temperature in the hot filament test shall not be lower than +960°C. It shall possess properties such as full insulation, dust resistance, water resistance, corrosion resistance, impact resistance, UV resistance, heat resistance, flame retardancy, shock resistance, and high mechanical strength.
Sectional maintenance boxes shall be made of polycarbonate material, which is characterized by corrosion resistance, halogen-free composition, flame retardancy, and self-extinguishing capability. The impact resistance rating shall meet IK09, and the box body shall be of an integrated design. Sealing bolts shall be provided for cable entry into the maintenance boxes, and sufficient space for incoming cables shall be considered. Sockets shall have high impact resistance and corrosion resistance; industrial connectors shall have a protection rating of IP67. Sockets and circuit breakers shall be mounted on the surface of the box body for ease of operation, with specific configurations detailed in the system diagram of the sectional maintenance boxes. The overall protection rating of the maintenance boxes shall reach IP66.