Safewire FT-09W Furniture Embedded Fast Wireless Charger with Pop-up Dual Built-in USB-a Output Charging

1) Product detail

Application:

1.Feature of Safewire Wireless charge:

1.Charging distance over : 10-20mm,more complete wood,glass,porcelain,rock surface while charging.

2.More 10 optional Grommet , flush-mounting,undertable,and column etc. design

3.ABS/PC V-0 fire proof material with CE,FCC,RED,ROHS,Certificate

2.Advantage of Safewire Wireless charge :

Wireless charger/PD USB charger/QC 3.0 USB charger/recess wireless charger/recess socket/wireless socket /table socket/charging socket/mounting charging

1.PD18W,QC3.0,5W/7.5W/10W/15W QI I-coilfast wireless charger

2.Teeth around and lock mechanism,more stable & Convenient Installation

3.Supply with Input USB Cable and accessories

3.Specification of Safewire Wireless charge :

A)Product dimension:

B) Overcurrect protection,over voltage protection Temperature control,smart clip,safety protection for you device.

C) Safewire Wireless charger Application in furniture table.

Attentions:

1.Dispose of trash in bottom box and prevent dirt and debris from entering inside.

2.The sealing ring is closely attached to the smooth surface to prevent water leakage.

3.When installing, pay attention to the opening direction,the length of the conductor to the bottom box shall not exceed 10cm,Set aside at least 200mm of cable.

4.When installing and wiring,Product should avoid direct contact with corrosive liquid, gas (strong acid, strong alkali, paint).

5.Please close cover when not used.

Safety Warning：

1.This is a class I product and must be earthed

2.This product must be installed/wired by a qualified electrician

3.For indoor use only.

4.For concrete floor/access floor.base on different bottom box.

Product show

Installation procedure

Application：

The enclosures of all maintenance boxes shall be fabricated from halogen-free, non-toxic, and environmentally sustainable materials. Their corrosion resistance shall be capable of withstanding exposure to solutions with an acid concentration of 10% or an alkali concentration of 10% and above. The material shall exhibit a temperature stability range of no less than -40°C to +90°C, and its flame resistance temperature in the hot filament test shall not be lower than +960°C. It shall possess properties such as full insulation, dust resistance, water resistance, corrosion resistance, impact resistance, UV resistance, heat resistance, flame retardancy, shock resistance, and high mechanical strength.

Sectional maintenance boxes shall be made of polycarbonate material, which is characterized by corrosion resistance, halogen-free composition, flame retardancy, and self-extinguishing capability. The impact resistance rating shall meet IK09, and the box body shall be of an integrated design. Sealing bolts shall be provided for cable entry into the maintenance boxes, and sufficient space for incoming cables shall be considered. Sockets shall have high impact resistance and corrosion resistance; industrial connectors shall have a protection rating of IP67. Sockets and circuit breakers shall be mounted on the surface of the box body for ease of operation, with specific configurations detailed in the system diagram of the sectional maintenance boxes. The overall protection rating of the maintenance boxes shall reach IP66.