| Serial No. | Parameter | Description |
|
1 |
Panel Material | Brass alloy/Stainless steel |
| 2 | Surface finish | Wire drawing / Polishing / Spray painting |
| 3 | Panel Dimension(mm) | Φ140 |
| 4 | Cutout(mm) | 125*125 |
| 5 | Capacity of modules | 2 ways modules |
| 6 | Horizontal mounting | Horizontal installation |
| 7 | Sink box Material | Steel+Zinc plated |
| 8 | Base box dimension(mm) | 125*125*60 |
| 9 | Available modules | 45*45/22.5*45(mm) |
1.direction junction boxes :configured with up to four opening sides in combinations to provide for a wide varity of duct applications.
2.Junction boxes have adjustable cover plate assemblies which allow for adjustment upwards permitting accurate leveling to the finished floor.
3.A series of stainless or brass pans and rings are available to accept a wide range of floor finishes.
Available sockets or modules types:
The enclosures of all maintenance boxes shall be fabricated from halogen-free, non-toxic, and environmentally sustainable materials. Their corrosion resistance shall be capable of withstanding exposure to solutions with an acid concentration of 10% or an alkali concentration of 10% and above. The material shall exhibit a temperature stability range of no less than -40°C to +90°C, and its flame resistance temperature in the hot filament test shall not be lower than +960°C. It shall possess properties such as full insulation, dust resistance, water resistance, corrosion resistance, impact resistance, UV resistance, heat resistance, flame retardancy, shock resistance, and high mechanical strength.
Sectional maintenance boxes shall be made of polycarbonate material, which is characterized by corrosion resistance, halogen-free composition, flame retardancy, and self-extinguishing capability. The impact resistance rating shall meet IK09, and the box body shall be of an integrated design. Sealing bolts shall be provided for cable entry into the maintenance boxes, and sufficient space for incoming cables shall be considered. Sockets shall have high impact resistance and corrosion resistance; industrial connectors shall have a protection rating of IP67. Sockets and circuit breakers shall be mounted on the surface of the box body for ease of operation, with specific configurations detailed in the system diagram of the sectional maintenance boxes. The overall protection rating of the maintenance boxes shall reach IP66.