Factory selling Grommets - SNE-210 – Safewire Electric

Product Description

Features

Shutter without back box and is commonly used as a snap in accessory for wall plates, available for keystone & fibre adaptors in 90°angled. The Shutter inserts into the wall opening, flexible tabs bend up to secure the shutter to the opening. Angled shutters for floor boxes also available in 90°.

Designed to fit the 45*45mm face plates and patch panel/floor box and accept any RJ-Keystone jack UTP or Shielded module..Shutters accept any combination of popular global brands keystone Jacks,Multimedia, blank modules, Jacks etc.

Specification:

1. Plastic: High-impact thermoplastic that is rated UL94V-0 fire-retardant.
2. Dimension:45*45mm/0.89”/1.78”;
3. With label paper

RoHS Certificate of Compliance：Conforms with the Directive 2002/95/EC (ROHS)

The enclosures of all maintenance boxes shall be fabricated from halogen-free, non-toxic, and environmentally sustainable materials. Their corrosion resistance shall be capable of withstanding exposure to solutions with an acid concentration of 10% or an alkali concentration of 10% and above. The material shall exhibit a temperature stability range of no less than -40°C to +90°C, and its flame resistance temperature in the hot filament test shall not be lower than +960°C. It shall possess properties such as full insulation, dust resistance, water resistance, corrosion resistance, impact resistance, UV resistance, heat resistance, flame retardancy, shock resistance, and high mechanical strength.

Sectional maintenance boxes shall be made of polycarbonate material, which is characterized by corrosion resistance, halogen-free composition, flame retardancy, and self-extinguishing capability. The impact resistance rating shall meet IK09, and the box body shall be of an integrated design. Sealing bolts shall be provided for cable entry into the maintenance boxes, and sufficient space for incoming cables shall be considered. Sockets shall have high impact resistance and corrosion resistance; industrial connectors shall have a protection rating of IP67. Sockets and circuit breakers shall be mounted on the surface of the box body for ease of operation, with specific configurations detailed in the system diagram of the sectional maintenance boxes. The overall protection rating of the maintenance boxes shall reach IP66.