2017 Latest Design Hdmi Usb Pop Up Box - J-NE-54 – Safewire Electric

Product Description

Features

* Meet or exceed both EIA/TIA 568A Category 5e and EIA/TIA 568A Category 6 specifications.

*Two port surface mount boxes allow for base or side entry of cable

*Use the same tried and true 110 Style punch downs, which have phosphor bronze contacts

*Available in our Patch Panels and Keystone Jacks so there is no need to switch tools in the middle of an installation

*Come with a double sided adhesive pad that allows creative mounting almost anywhere which holds up even in the most aggressive environments

*Eight Conductor CAT6 110 Punch Down Terminals

Specification:

1. Plastic: High-impact thermoplastic that is rated UL94V-0 fire-retardant.
2. Converts: Converts back and forth between 2 CAT6 Ports and 110 Punch Down.;
3. Use this shielded Cat6 duplex surface mount box to tidy up network installations in the home or office where wall plates are not an option.
4. RJ45 Jack, 8P8C 50 Micro Inches Gold Plated.

RoHS Certificate of Compliance：Conforms with the Directive 2002/95/EC (ROHS)

The enclosures of all maintenance boxes shall be fabricated from halogen-free, non-toxic, and environmentally sustainable materials. Their corrosion resistance shall be capable of withstanding exposure to solutions with an acid concentration of 10% or an alkali concentration of 10% and above. The material shall exhibit a temperature stability range of no less than -40°C to +90°C, and its flame resistance temperature in the hot filament test shall not be lower than +960°C. It shall possess properties such as full insulation, dust resistance, water resistance, corrosion resistance, impact resistance, UV resistance, heat resistance, flame retardancy, shock resistance, and high mechanical strength.

Sectional maintenance boxes shall be made of polycarbonate material, which is characterized by corrosion resistance, halogen-free composition, flame retardancy, and self-extinguishing capability. The impact resistance rating shall meet IK09, and the box body shall be of an integrated design. Sealing bolts shall be provided for cable entry into the maintenance boxes, and sufficient space for incoming cables shall be considered. Sockets shall have high impact resistance and corrosion resistance; industrial connectors shall have a protection rating of IP67. Sockets and circuit breakers shall be mounted on the surface of the box body for ease of operation, with specific configurations detailed in the system diagram of the sectional maintenance boxes. The overall protection rating of the maintenance boxes shall reach IP66.