XJY-USB-27-A-A

Short Description:


  • Port: Wenjiang
  • Technical Parameters

    Feature

    Outline drawing

    certification

    Application

    Product Tags

    USB Characteristic;

    Serial No. Parameter Description
    1 Product module XJY-USB-27-A/A
    2 Outlet USB charger
    3 Panel Material PC 94-V0
    4 Inside material Tin phosphorous bronze
    5 Surface finish Glossy
    6 USB DC output 2.1A/5V
    7 Output voltage tolerance ±5%
    8 Output power Max.10.5W
    9 Service life in hours 3000h 10.5W
    10 Efficiency 78%
    11 No-load power consumption Max 0.2W
    12 Input voltage 100~240v/AC 50~60Hz
    13 Color White RAL9003 Black
    14 Number of terminals 2 screw terminals
    15 Electrical insulation class Class II
    16 IK degree of protection IK04
    17 IP degree of protection IP21
    18 Dimension of product 50*50mm

    Environmental requirements:

    Serial No. Parameter Description
    1 Operating temperature -10~+40;Operating
    2 humidity 20%~90% RH
    3 Storage temperature -20℃~+85℃;storage
    4 humidity 10%~95% RH
    5 Resistance to pressure 3Kv/AC 1min
    6 Isolation resistance 500v DC/100MΩ

  • Previous:
  • Next:

  • 1).Dual port USB charger of 2.1A 5VDC;

    2). Protection type: Short time short-circuit protection;

    3).With identifying chip: can automatically recognize different mobiles and suit its request charging AMP to meet the charging speed;

    4) Product be certificated by CE,IEC60950 FOR LVD and IEC55024,IEC61000 for EMC;

    5). All materials be ROHS directive tested;

    Testing Item Testing Standard Testing Data
    Aging test USB charger for 2 hours with LED lights must always light 2 hours
      High and low pressure 90V-264V to normal operation 90V-264V normal
    Power test Rated output voltage range: no-load: 5V±5%, load:5V±5% No-load: 4.92-4.95V, load: 5.04-5.1
      Rated output current 5.0V
      Output ripple: load 1A/2.1A, Vpp<200mV 117mV-146mV
      Short circuit protection: output positive and negative short for 2 minutes, after the break to work properly 2 minutes
      Pin output voltage: D-: 2.75VDC/D+:2VDC, subject to actual test value D-:2.77V/D+:2.763V